WHAT IS LIGHTNING PROTECTION SYSTEM?
The term “lightning protection system” refers to a system that includes an air filtration system, a down-conductor system, and an earth-termination system and is located on the exterior of a building and intercepts, conducts, and disperses lightning currents to the ground.
IMPORTANCE OF A LIGHTNING PROTECTION SYSTEM (LPS SYSTEM)
It is critical to install a Lightning Protection System (LPS) to ensure that your facility is secured from such a lightning strike. The majority of LPS are placed on roofs in areas where lightning strikes are common. During the construction phase, the LPS is frequently included into a continual membrane roofing system.
USES OF LIGHTNING PROTECTION SYSTEM
Lightning strikes can harm or kill people in a variety of ways. Within or around a building, thunderstorms (or even electrical discharges caused by adjacent lightning) can produce fires, explosions, chemical releases, or mechanical disruption. Individuals (and animals) in close proximity can be injured or even killed by the step and contact voltages generated by a lightning strike.
The possibility of harm to critical electronic systems, as well as the gravity of the repercussions of any damage, is more real than ever. Industrial, economic, and governmental organizations alike would be crippled if these systems were lost.
LIGHTNING PROTECTION SYSTEM IN BANGLADESH
In Bangladesh, a basic lightning protection system will cost approximately between 2,00,000 and 3,00,000 BDT. Highly professional lightning protection systems might amount up to 2,50,000 BDT given that you choose for bigger and costlier projects.
LIGHTNING PROTECTION SYSTEM PRICE IN BANGLADESH
The costs of various components of the lightning protection system are listed below.
A lightning arrester rod, also known as a lightning conductor, is a metal rod that protects a structure from thunderstorms and lightning strikes. Copper is the strongest conductor of electricity, hence this lightning arrester is built of copper and brass alloy.
Lightning arrester system price in Bangladesh would be ranging from 1,50,000 to 2,50,000 BDT.
The Early Streamer Emission (ESE) Lightning Arrester is a safe and dependable solution for protecting your building or solar project against direct lightning strikes. The ESE Lightning Arrester, also referred as Active Lightning Arrester, allows you to reduce the number of Lightning Arresters and down conductors required for your building or solar project while still offering comprehensive protection.
ESE lightning arrester price in Bangladesh is around 2,50,000 to 5,00,000 BDT.
Thunder protector price in Bangladesh
This is similar to a lightning arrester and it will keep your electronic gadgets out of risk during thunderstorms and lightning strikes.
Thunder protector price in Bangladesh would be starting from 3,00,00 to 5,00,000 BDT.
A conventional surge protector distributes electrical current to a number of devices hooked into the power cord via the outlet. The protector will channel any excess electricity into the outlet grounding wire if the voltage rises over the permitted threshold.
Surge protector price in Bangladesh would be between 9000 to 20000 BDT only.
BUYING GUIDE OF LIGHTNING PROTECTION SYSTEM
You must be familiar with all the factors of an optimal lightning protection solution in order to make an informed purchase of the required lightning protection system.
The cost of a lightning protection system in Bangladesh will also vary depending on the features or on the type of project you want it for.
Get an idea of the vital components of the lightning and surge protection system in Bangladesh by going through our lightning protection system buying guide.
The potential differences induced by lightning currents are reduced by lightning equipotential bonding. This is accomplished by using conductors or surge protecting devices to connect all isolated conducting portions of the system.
GROUND ELECTRODE SYSTEM
The use of the grounding electrode is to transfer lightning and other unwanted voltages from the power circuit to the earth, where they can be taken away from the electrical connections of the buildings.
For lightning protection, copper and aluminum cable conductors are built with thinner gauge individual wires in a smooth weaving or rope-lay pattern. This design provides the most contact area per unit of weight of conductor, allowing lightning to travel swiftly over the surface.
SURGE PROTECTION DEVICE
Surge Protective Devices (SPD) are used to safeguard the electrical installation, which includes the consumer unit, wiring, and accessories, against transient voltage overloads (electrical power surges).
WHY CHOOSE US
LPI offers professional designs for lightning protective devices, thunder protection systems, surge protection systems, lightning arrester systems, and any other LPS systems based on our customers’ particular preferences. For lightning protection, we use multiple renowned international standards like NFPA 780, BS EN/IEC, NFC 17-102 and also our national standard BNBC code.
Here at LPI we always provide the best quality and effective lightning protection systems. LPI has outlined four critical procedures that must be followed at all times to provide total facility protection.
- Area protection is defined and provided
- A bonded grounding system is being developed.
- Mains power line protection.
- Signal, data, and communication links are all protected.